Wet Area Ventilation Options For Your Home

Copyright (c) 2015 Matt Reardon

A home that is damp is challenging could expose you and your family to sickness. Damp homes are generally associated with frequent doctor's visits for a variety of respiratory complications such as asthma. Dampness in your home encourages mildew and mould which could also damage your health. Homes experiencing persistent dampness also deteriorate more rapidly hence losing value, besides being uncomfortable to live in.

Good home ventilation is essential for the maintenance of air quality and for removing excess moisture from wet places in your home. Generally, the most affected sections by wetness are the bathroom and some kitchens.

When planning for your wet area ventilation, there are several building code requirements which you should be well versed about. Because installing ventilation systems may touch on the entire structure of your house, the Building Code of Australia (BCA) would be a useful place to start.

How Can I know that My House is Damp?

Although your house could be damp and still show no obvious indications, the following are the most obvious signs of excess moisture:

• Musty smells.

• Mildew and mould.

• Water stains

• Condensation on your hard surfaces.

• Rotting and swelling wood or wood-based materials.

• Bubbling vinyl floor coverings and wall linings.

• Rotting carpet.

Sufficient home ventilation is necessary to preserve a healthy environment. It also prevents the build-up of extreme humidity levels and supplies air that is needed for your fuel-burning appliances. A good system of ventilation will assist in removing cooking smells coming from your kitchen and bathroom, and make your home significantly more healthy and pleas¬ant to live in.

In general, you will have an option between two main ventilations systems or even a combination of both:

1. The infiltration system is the uncontrollable exchange of air between outside and inside a build¬ing via a variety of air leakage routes within the building structure, what are referred to as drafts.

2. The purpose-provided ventilation system is the controllable exchange of air through a variety of natural or mechan¬ical devices. This could be trickle vents in your windows and electric fans that extract air from your wet areas.

Which is the Best Ventilation Solution for You?

The most suitable ventilation system for your wet area will largely depend on:

• The amount of money you are willing to spend.

• The level of system main¬te¬nance which you consider as acceptable.

• The degree of importance you are placing on energy efficiency.

• If you desire to filter, cool or warm the incoming replacement air.

• A major consideration could be esthetics.

• The noise levels that you are willing to put up with.

• Whether you wish to combine your home ventilation with a heating or an air conditioning system.

Whichever ventilation system you decide to install in your home, it has to be in conformity with the Ventilation Codes AS 1668.2 and Standard AS 1668.4 put in place by Standards Australia. This is the body set up by the government of Australia for laying down standards in the country. AS 1668.2 deals with Mechanical Ventilation of Buildings while the AS 1668.4 tackles Natural Ventilation of Buildings.


----------------------------------------------------
MouldBuster is recognized in all Australia for their home ventilation systems. Matt Reardon knows what is best for your specific ventilation requirements. You will be pleased to have visited MouldBuster after interacting with Matt you can also visit their webpage at http://mouldbuster.com.au/wet-area-ventilation/ .